Sunday, November 25, 2012
This is a repeat of an oldie but goodie. About three years ago I made this same apron for my middle daughter when she hosted Thanksgiving. This year we were visiting the newlyweds who decided to host their first Thanksgiving. In a moment of clarity of recall I remembered this quick "Apron in an hour". It took a few more minutes this time because I had to fudge a bit with fabrics.
I used the same fabrics used for the bridesmaid's luggage tags. Since I had cut into the half yard cuts I had bought for the tags I needed to make the strip along the bottom deeper to give the apron adequate length as well as make the waistband a tad more narrow. That took some cipherin' which in turn took me a few minutes longer to complete the task. Older daughter had commented that the original apron ties could use to be a tad longer so I made that adjustment as well.
All in all if you need a quick inexpensive gift, again I suggest this quick apron. It is great for a new bride or a not so new bride that wants something fresh in the kitchen. It may have taken me a few more minutes than a hour but not too many more. Hmmm, I may have to make one now for oldest daughter. Act surprised!
For my stateside readers, I hope your Thanksgiving holiday was filled with blessings and grace. Now onto the Christmas season! I hope you have something fun planned to stitch for the holidays. My mind is swirling with all kind of ideas. Let me be the first to wish you a...
Wednesday, November 21, 2012
I hope for you faithful reader, a blessed Thanksgiving. This holiday can be filled with joy or frought with heartache and everywhere in between. May we all have the capacity to stop and be thankful for the blessings in our lives however large or small. A blessed day to you.
Tuesday, November 20, 2012
Our chapter does a bi-annual doll auction as part of our annual auction to raise money for both our Wee Care and Education Programs. I had every good intention in getting more made for the auction, but you know that road to he** is paved with good intentions. That is what my mother always said. Oh well. Onward and upward!
This year's dress came from "Dolly's Wardrobe" by Children's Corner. I used Marilyn.
The dress is made from a poly/cotton gingham with a ribbon out of the ribbon tin. I have no idea what I bought either for, I was just glad they were both there when I needed them two days before the auction! I have never made the full sized version of this dress but I do know you never could make it from corduroy. There are 10 layers of fabric where the sleeve meets the shoulder seam. TEN! The bodice and bodice overlay are both lined as well as the sleeve being lined. Ten layers at the seam. That is a lot of layers.
You may not be able to tell, but the overlay is reversed from the intended direction. I don't think the dolly or the dolly's little girl will notice. A simple dress but it was finished.
This is just a portion of what was made for the doll. There is quite a lot that isn't pictured and this is not the best picture. I apologize.
This amazing ensemble was made by another chapter member. Anne G posted this picture on Facebook. The picture doesn't do it justice. Gorgeous smocked coat, hat and muff.
I didn't get a chance to make anything else for the auction but I made up for it in purchases. I have a couple of baby gifts now waiting for a lucky recipient as well as some delicious homemade chocolate covered marshmallows to share at Thanksgiving.
Until next time faithful reader.
Sunday, November 18, 2012
The pattern I used was Daniel by Primrose Lane. I have used it before here. Again I am leaning towards inserts that aren't 4 and 5 inches high. On a little person that doesn't walk yet, that deep of an insert seems to bunch up into their faces while they are sitting. I had originally planned to use Beach Baby from AS&E but the only knit I had was white but not the same white as the insert fabric. So powder blue poly/cotton it was.
It is piped with Susie's Ready to Smock purchased piping. You may have noticed in the first picture that the sleeve cuffs aren't piped. I ran out of piping in the package. I had two packages marked with the same color but they are definitely from different dye lots.
The plate used was Ellen McCarn's "Tiny Rocking Horses." A plate I have had for yeeeears but never used. I didn't smock an obvious birthday plate because there was something waiting for him in the Mimi closet.
This is Bobby's Tabard Suit from Beacoup. It is out of print but I found it listed here on etsy. My pattern is MIA. The plate I used is Ellen McCarn's Birthday Bear.
I made it for another sweet boy's first birthday 21 years ago. I included this sweet romper in the Prince's birthday box along with other birthday goodies.
I hope you are planning a wonderful holiday either large or small. We are headed to the newlywed's house for the holiday. No one told her she didn't really want to host both sides of the family for the first holiday, eight weeks out of the gate. She has taken the plunge. We are headed her way to feast with most of the family. We will sorely miss those not with us but be thankful for AT&T.
Happy Thanksgiving to you faithful reader. Please remember those who are suffering around the globe at this time. We have so much to be thankful for.
Thursday, November 15, 2012
I couldn't leave out Princess. Although the postal service where she lives is trying REALLY hard to do just that. Grrr. Can you tell I'm irritated? Hopefully it will miraculously appear before Saturday. Enough of that.
I used Gail Doane's little swing jacket. The pattern is available either in this book, Sew Cute Couture or as part of one of her many class kits. It fits great and looks great. As much as I love the hand embroidery featured on Gail's patterns, I didn't have time for that this time. It is made of the same deep plum colored wool as baby brother's and interlined with flannel. So three layers ought to be warm enough.
The sizing for this little pattern is generous. I expect that if it gets there before she goes to kindergarten, that the sleeves may be a tad long, so I lined the jacket in the same gingham I used for the binding. That way if her mother needs to roll the sleeves up, it will look intentional. Again I used gingham covered buttons to match. I didn't take a picture of my favorite part, the little swing pleat down the center back. So cute on a toddler.
|Buttons and Bunnies Jacket|
Where did this baby girl go? This was taken the day her baby brother was born.
|Ring of Roses Jacket|
This is the third of these jackets I have done. Plus, I may or may not have two kits upstairs for more of these sweet jackets, and another finished red one WITH a matching dress waiting for her to grow into made by my sweet friend Dawn. Can you tell we love this jacket? I wish I were prolific enough for her to have a matching jacket for every dress but alas I am not.
Gail also has kits available on Etsy. Try this little jacket even if you don't have time to make the matching bishop. This little jacket goes together so quickly they are like Lay's potato chips; you can't make just one.
Many have written asking about my shoulder. Thank you. It is coming along albeit way too slow for this impatient patient. The physical therapist is happy, we'll see if the surgeon is happy on Monday. I have grown so attached to my physical therapist, I don't know what I will do without seeing her three times a week. I see her more than my husband and children. Next up, the 25 yards of Santa fabric is pressed and ready to cut out today. Wish me luck.
Until next time, faithful reader.
Wednesday, November 14, 2012
First off, I cut out and interfaced a block of my jacket fabric before cutting out according to the pattern piece. The interfacing gave some support to the embroidery and by using a block larger than my intended pattern piece it gave me room for forgiveness. I used German interfacing available from many heirloom retailers.
Another prep step was, when I embroidered the second mouse, I horizontally "flipped" the image before stitching. I wanted my little mice to face each other. This can be either through the embroidery software or in the embroidery machine itself.
After my two blocks were embroidered I placed them wrong sides together. To make sure that both mice were even with each other, I pinned through both blocks around the embroidered design, matching the edges. When pinning under his feet for example, I made sure that the pin exited exactly under the bottom block at the same place as it shows on the top block. I hope that makes sense. I didn't take a picture of that step.
Then I needed to find my center. In finding the center, take into account the farthest edges of the whole design, in this case his tail. Otherwise your tail will end up right next to the edge while on the opposite side of the mouse you would have a large blank space from the outer edge to his paw. A space you wouldn't notice until the entire jacket was put together. Trust me.
After finding the center of your design, fold your pattern piece in half, matching cutting and stitching lines to find the pattern center. In this case the center just happened to be the grain line indicated on the pattern piece. How lucky is that? I then marked on the pattern piece the stitching lines. I felt like marking the stitching line was more critical than the cutting line. Who cares where I cut it, if my stitching was off.
As described in my previous post, I altered the shape of the pocket, I rounded the bottom two corners and also took away the folded flap on the top of the pocket. This is my resulting pattern piece. Since it wasn't transparent as the tissue pattern piece I marked the seam lines on the new pattern piece as well. I matched the stitching lines on both the pattern piece and the embroidered blocks. (The chalk lines were very difficult to see in the picture so I "drew" the lines in with photoshop so you could see.) To avoid distorting my pattern on the blocks once I had the stitching lines matched, I taped the pattern to the fabric. Much more accurate. I then cut out both pockets simultaneously with a rotary cutter through both layers.
Voila! Two matching pockets. Visually it may be difficult to tell that the mouse is centered, but I measured from the tip of his paw to the seam line and from the outer most side of his tail to the seam line. They matched. I then piped and lined the pockets with the grey gingham.
The pockets were top stitched to the jacket fronts. Just big enough for little hands to hide treasure in.
I hope you are stitching something fun. I am off to finish pressing that 25 yards of Santa fabric. You should have seen the physical therapist's face when I told her! My goal is to iron with my left arm. We will see how that goes.
Monday, November 12, 2012
Princess and her baby brother are headed to England for a fun trip. Only drawback? They had no coats. This time of year is chilly and damp in England. Mimi to the rescue. As luck would have it, a friend gifted me with several yards of wool while I was at convention. I set to work.
I used Children's Corner Robin's Little Jacket for baby brother's jacket. I did not quilt the jacket.
I used the deep purple wool and lined it with grey gingham. For added warmth it is interlined with flannel.
The pockets are embroidered with the sweet mouse from the Pajama Party set from Design by JuJu. I modified the pocket from the original pattern design. I rounded the lower corners of the two pockets and added piping around the outside edges.
This little jacket goes together in nothing flat. It took longer to align the two mice to make sure they were mirror images and aligned with the same orientation on the pockets than it did to put the entire jacket together. I'll do a post on that in a day or two.
Now keep your fingers crossed that the box arrives in time.